www.creosite.com© O. Corten

creo7 Drawing Setup option documentation for: DEFAULT_SKETCHER_HATCH_SPACING            

(Only MBD)

default_sketcher_hatch_spacing

Sets the spacing between hatching lines in closed areas within a sketch.
Default and Available Settings:
relative* - The spacing between hatch lines is calculated based on a scale value relative to the sketch outline.
0.1<value - The spacing between hatch lines is set based on a model unit value.
* 
When you create a drawing from the part that contains a sketch feature, the spacing between hatching lines defined by this option also reflects in the drawing.