creo5 Drawing Setup option documentation for: DEFAULT_CHAMF_TEXT_ORIENTATION
(Also MBD)
default_chamf_text_orientation
Controls the text orientation for 45-degree chamfer dimensions in drawings.
Default and Available Settings:
next_to_and_centered_about_elbow * - Places the dimension text in the horizontal
position. The dimension text is vertically centered about the elbow line (ASME standard).
next_to_and_above_elbow - Places the dimension text in the horizontal position.
The dimension text is above the elbow line (ISO standard).
above_extended_elbow - Places the dimension text in the horizontal position. The
elbow is below the dimension text and extends to the width of the dimension text (ISO standard).
parallel_to_and_above_leader - Places the dimension text parallel to and above
the leader line (JIS standard).
parallel_to_and_below_leader - Places the dimension text parallel to and below
the leader line (JIS standard).
iso_parallel - Displays text parallel to a dimension witness line. This differs
from the value parallel as this will also allow dimension tolerances to be displayed in ISO 406:1987 (E) format or British Standard Tolerance Format.