www.creosite.com© O. Corten

creo4 Drawing Setup option documentation for: CUTTING_LINE            

( ( ( ( ( ( ( (

cutting_line

Controls the standard for the cutting line display.
Default and Available Settings:
std_ansi* - Uses the ANSI standard for cutting lines.
std_din - Displays the thickened portion of the cutting line in white, and displays its thin portion in gray.
std_iso - Uses the ISO standard for cutting lines.
std_jis - Uses the JIS standard for cutting lines.
std_ansi_dashed - Displays the cutting line as dashed lines.
std_jis_alternate - If set to "std_jis_alternate" and the Detail option "cutting _line_segment" is set, displays view arrows as follows:
o The thickened portion of the cutting line forms an angle and the system displays it in blue.
o Displays the connecting portions of the cutting line segment between thickened segments in yellow.
o Displays arrow portions in white.
std_eskd - Uses the ESKD standard for cutting lines.
o Displays only the end portions of the cutting line and any corners in the internal portion of the cutting line.
o The cutting line is extended beyond the point where it touches the arrow. The length of the extended portion of the cutting line is determined by the value of the detail option crossec_arrow_width that defines the width of the arrow head.
std_gb - Uses the GB standard for cutting lines.
o Displays only the end portions of the cutting line and any corners in the internal portion of the cutting line.
o The cutting line ends exactly at the point where it touches the arrow.
 
* If you set the cutting_line_segment detail option to 0, the entire cutting line appears as a dashed line. However with ESKD and GB standards, the cutting line appears as a thin continuous line.